Paper
18 June 2007 Real-time multicamera system for measurement of 3D coordinates by pattern projection
Ventseslav Sainov, Elena Stoykova, Jana Harizanova
Author Affiliations +
Abstract
The report describes a real-time pattern-projection system for measurement of 3D coordinates with simultaneous illumination and recording of four phase-shifted fringe patterns which are projected at four different wavelengths and captured by four synchronized CCD cameras. This technical solution overcomes the main drawback of the temporal phase-shifting profilometry in which the pattern acquisition is made successively in time. The work considers the use of a sinusoidal phase grating as a projection element which is made by analysis of the frequency content of the projected fringes in the Fresnel diffraction zone and by test measurements of relative 3D coordinates that are performed with interferometrically recorded sinusoidal phase gratings on holographic plates. Finally, operation of a four-wavelength profilometric system with four spatially phase-shifted at &pgr;/2 sinusoidal phase gratings illuminated with four diode lasers at wavelengths 790 nm, 810 nm, 850 nm and 910 nm is simulated and the systematical error of the profilometric measurement is evaluated.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ventseslav Sainov, Elena Stoykova, and Jana Harizanova "Real-time multicamera system for measurement of 3D coordinates by pattern projection", Proc. SPIE 6616, Optical Measurement Systems for Industrial Inspection V, 66160A (18 June 2007); https://doi.org/10.1117/12.726380
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fringe analysis

Phase shift keying

3D metrology

Diffraction gratings

Modulation

CCD cameras

Phase shifts

Back to Top