Comparative study of surface roughness with power spectral density and multifractal spectrum

Shuyi Gan; Qing Zhou; Yilin Hong; Xiangdong Xu; Ying Liu; Hongjun Zhou; Tonglin Huo; Shaojun Fu D.V.M.

doi:10.1117/12.783328

27 November 2007 Comparative study of surface roughness with power spectral density and multifractal spectrum

Shuyi Gan, Qing Zhou, Yilin Hong, Xiangdong Xu, Ying Liu, Hongjun Zhou, Tonglin Huo, Shaojun Fu D.V.M.

Proceedings Volume 6723, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 67232R (2007) https://doi.org/10.1117/12.783328
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China

Abstract

This paper presents a comparative studied of surface roughness. Samples were first measured by atomic force microscope (AFM). The acquired height data was then processed to calculate their power spectral density (PSD) and multi-fractal spectrum (MFS). The calculation results indicate that MFS of different samples with same sampling length differs significantly from each other, while the MFS of the same sample with different sampling length or different sampling position is quite similar. The calculation also shows that MFS is very sensitive to particles or scratches appeared on the surface. The PSD of the same data acquired from these samples are also presented for comparison. It is clear from the calculation results that the PSD curves vary with the sampling position and sampling length, thus makes the evaluation uncertain. No quantitative index available from PSD, only qualitative information obtained. Comparatively, MFS is better in description of a surface roughness.

Citation Download Citation

Shuyi Gan, Qing Zhou, Yilin Hong, Xiangdong Xu, Ying Liu, Hongjun Zhou, Tonglin Huo, and Shaojun Fu D.V.M. "Comparative study of surface roughness with power spectral density and multifractal spectrum", Proc. SPIE 6723, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 67232R (27 November 2007); https://doi.org/10.1117/12.783328

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available