Paper
27 November 2007 Investigation on gain-clamped characteristics of ring cavity L-band EDFA
Hongwei Yan, Yubin Guo, Bing Bai, Tianshu Wang, Jiayu Huo
Author Affiliations +
Proceedings Volume 6781, Passive Components and Fiber-based Devices IV; 67814F (2007) https://doi.org/10.1117/12.743552
Event: Asia-Pacific Optical Communications, 2007, Wuhan, China
Abstract
A novel gain-clamped Long wavelength band erbium doped fiber amplifier (L-band EDFA) based on ring erbium-doped fiber laser cavity was demonstrated. By using a fiber Bragg grating (FBG) at the output end of the amplifier, a portion of forward conventional band (C-band) amplified spontaneous emission (ASE) was reflected back into the system, this new design provided a good gain clamping and decreased noise effectively. It used 1480nm laser diode (LD) to pump high Er3+ −concentration erbium-doped fiber for higher efficiency and lower noise figure (NF). The gain was clamped at 17.5dB with a variation of 0.3 dB from input signal power of -30dBm to -12dBm for a pump power of 180mW. By adjusting the intra-cavity loss, the gain reached 19.78dB with inputting small signal and NF below 5dB was obtained. At the longer wavelength (1614nm) of L-band 9.2dB gain was obtained.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongwei Yan, Yubin Guo, Bing Bai, Tianshu Wang, and Jiayu Huo "Investigation on gain-clamped characteristics of ring cavity L-band EDFA", Proc. SPIE 6781, Passive Components and Fiber-based Devices IV, 67814F (27 November 2007); https://doi.org/10.1117/12.743552
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

L band

Optical amplifiers

Interference (communication)

Signal attenuation

Nickel

Amplifiers

Back to Top