Paper
4 January 2008 Investigation on tribological behavior of Fe-based alloy coating formed by laser cladding
Longguang Shen, Qingmao Zhang, Jie Song, Jianhong Liao
Author Affiliations +
Abstract
In order to investigate the tribological performance of laser clad coatings on die steel, laser cladding techniques were adopted with Fe-based alloy powders. The wear tests were carried out by using laser clad layers as low samples and GCr15 steel ball as upper samples with HT-500 wear tester. The morphologies of wear scars were observed with optical microscopy, and the wear width and the depth of the wear samples were measured. In the meantime, the wear rate was calculated theoretically. Under dry sliding condition, As the tests show, friction coefficient decreased with the load increase gradually, then increased. And the wear performance of 300g load was better than that of 500g load under dry sliding condition. Under lubricant condition, with the increase of load, the friction coefficient decreased gradually. And the friction coefficient, wear rate and wear width under lubricant are smaller than that under dry friction with the same load.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Longguang Shen, Qingmao Zhang, Jie Song, and Jianhong Liao "Investigation on tribological behavior of Fe-based alloy coating formed by laser cladding", Proc. SPIE 6825, Lasers in Material Processing and Manufacturing III, 68251P (4 January 2008); https://doi.org/10.1117/12.785625
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Coating

Laser processing

Gas lasers

Metals

Resistance

Nd:YAG lasers

Back to Top