Paper
14 February 2008 Output characteristics of a passively Q-switched diode-laser pumped ceramic Nd:YAG laser
Duck-Lae Kim, Beom-Seok Lee, Hee-Sang Yoo, Jae-Yong Jeong, Yeong-Sik Kim
Author Affiliations +
Abstract
A passively Q-switched diode-laser pumped ceramic Nd:YAG laser has been constructed and the output characteristics has been investigated. The output efficiency of 36.1 % has been obtained with 1.1 at.% of neodymium concentration in the ceramic YAG. For the case of neodymium concentration of 2.0 at.%, the output power decreases as the pump power increases over 6 W. The output power has rapidly decreased more than 10 W of pumping, and the laser output has finally disappeared at pumping power of 13 W. This phenomenon can be explained by the thermal lens effect in the laser material. Passive Q-switching has been carried out using a Cr:YAG crystal in the resonator. The pulse width is 61.2 ns and the repetition rate is 10.1 kHz at the pump power of 1 W. The beam propagation factor M2 has been measured to be 1.2, which shows good beam quality of the Q-switched pulse.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Duck-Lae Kim, Beom-Seok Lee, Hee-Sang Yoo, Jae-Yong Jeong, and Yeong-Sik Kim "Output characteristics of a passively Q-switched diode-laser pumped ceramic Nd:YAG laser", Proc. SPIE 6871, Solid State Lasers XVII: Technology and Devices, 68712I (14 February 2008); https://doi.org/10.1117/12.762227
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nd:YAG lasers

Ceramics

Thermal effects

Q switched lasers

Output couplers

Crystals

Laser resonators

Back to Top