Wafer edge polishing process for defect reduction during immersion lithography

Motoya Okazaki; Raymond Maas; Sen-Hou Ko; Yufei Chen; Paul Miller; Mani Thothadri; Manjari Dutta; Chorng-Ping Chang; Abraham Anapolsky; Chris Lazik; Yuri Uritsky; Martin Seamons; Deenesh Padhi; Wendy Yeh; Stephan Sinkwitz; Chris Ngai

doi:10.1117/12.773113

25 March 2008 Wafer edge polishing process for defect reduction during immersion lithography

Motoya Okazaki, Raymond Maas, Sen-Hou Ko, Yufei Chen, Paul Miller, Mani Thothadri, Manjari Dutta, Chorng-Ping Chang, Abraham Anapolsky, Chris Lazik, Yuri Uritsky, Martin Seamons, Deenesh Padhi, Wendy Yeh, Stephan Sinkwitz, Chris Ngai

Author Affiliations +

Proceedings Volume 6922, Metrology, Inspection, and Process Control for Microlithography XXII; 69223A (2008) https://doi.org/10.1117/12.773113
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

The objective of this study was to examine the defect reduction effect of the wafer edge polishing step on the immersion lithography process. The experimental wafers were processed through a typical front end of line device manufacturing process and half of the wafers were processed with the wafer edge polishing just prior to the immersion lithography process. The experimental wafers were then run through two immersion lithography experiments and the defect adders on these wafers were compared and analyzed. The experimental results indicated a strong effect of the edge polishing process on reducing the particle migration from the wafer edge region to the wafer surface during the immersion lithography process.

Citation Download Citation

Motoya Okazaki, Raymond Maas, Sen-Hou Ko, Yufei Chen, Paul Miller, Mani Thothadri, Manjari Dutta, Chorng-Ping Chang, Abraham Anapolsky, Chris Lazik, Yuri Uritsky, Martin Seamons, Deenesh Padhi, Wendy Yeh, Stephan Sinkwitz, and Chris Ngai "Wafer edge polishing process for defect reduction during immersion lithography", Proc. SPIE 6922, Metrology, Inspection, and Process Control for Microlithography XXII, 69223A (25 March 2008); https://doi.org/10.1117/12.773113

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE