Paper
18 April 2008 A tabletop turbulence generator
David Soreide, Jonathan Saint Clair, Philip Cassaday
Author Affiliations +
Abstract
In order to iteratively improve an atmospheric optical communications system, a benchtop method of testing its behavior must be developed. We have developed a simple table top source of turbulence and instrumented it to accurately measure the current turbulent state. With this tool, the development of optical communication subsystems such as the Boeing Optical Communications Receiver Array (OCRA) can be optimized in the laboratory before they are tested in the atmosphere. The Tabletop Turbulence Generator is uses a small, low speed wind tunnel with a grid of heated rods at the head of the test section. This creates a turbulent flow with a characteristic scale of ~6-30 mm and maximum angular disturbances of ~.1 milliradians. This is a reasonable scale for 1 and 2 inch optical systems. A crucial element in this Turbulence Generator is instrumentation to allow us to measure the turbulent state. We have implemented a Shack-Hartmann sensor operating at 30 Hz and a Malley probe providing time resolved data along two lines of sight with a time resolution of .1 milliseconds. We have used this system to characterize the performance of communications receivers and will present this as a pilot study of the Turbulence Generator's performance.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Soreide, Jonathan Saint Clair, and Philip Cassaday "A tabletop turbulence generator", Proc. SPIE 6951, Atmospheric Propagation V, 69510L (18 April 2008); https://doi.org/10.1117/12.777896
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Turbulence

Sensors

Receivers

Laser systems engineering

Optical communications

Telecommunications

Atmospheric optics

Back to Top