Airborne measurements in the longwave infrared using an imaging hyperspectral sensor

Jean-Pierre Allard; Martin Chamberland; Vincent Farley; Frédérick Marcotte; Matthias Rolland; Alexandre Vallières; André Villemaire

doi:10.1117/12.776863

17 April 2008 Airborne measurements in the longwave infrared using an imaging hyperspectral sensor

Jean-Pierre Allard, Martin Chamberland, Vincent Farley, Frédérick Marcotte, Matthias Rolland, Alexandre Vallières, André Villemaire

Author Affiliations +

Proceedings Volume 6954, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing IX; 69540M (2008) https://doi.org/10.1117/12.776863
Event: SPIE Defense and Security Symposium, 2008, Orlando, Florida, United States

Abstract

Emerging applications in Defense and Security require sensors with state-of-the-art sensitivity and capabilities. Among these sensors, the imaging spectrometer is an instrument yielding a large amount of rich information about the measured scene. Standoff detection, identification and quantification of chemicals in the gaseous state is one important application. Analysis of the surface emissivity as a means to classify ground properties and usage is another one. Imaging spectrometers have unmatched capabilities to meet the requirements of these applications. Telops has developed the FIRST, a LWIR hyperspectral imager. The FIRST is based on the Fourier Transform technology yielding high spectral resolution and enabling high accuracy radiometric calibration. The FIRST, a man portable sensor, provides datacubes of up to 320×256 pixels at 0.35mrad spatial resolution over the 8-12 μm spectral range at spectral resolutions of up to 0.25cm^-1. The FIRST has been used in several field campaigns, including the demonstration of standoff chemical agent detection. More recently, an airborne system integrating the FIRST has been developed to provide airborne hyperspectral measurement capabilities. The airborne system and its capabilities are presented in this paper. The FIRST sensor modularity enables operation in various configurations such as tripod-mounted and airborne. In the airborne configuration, the FIRST can be operated in push-broom mode, or in staring mode with image motion compensation. This paper focuses on the airborne operation of the FIRST sensor.

Citation Download Citation

Jean-Pierre Allard, Martin Chamberland, Vincent Farley, Frédérick Marcotte, Matthias Rolland, Alexandre Vallières, and André Villemaire "Airborne measurements in the longwave infrared using an imaging hyperspectral sensor", Proc. SPIE 6954, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing IX, 69540M (17 April 2008); https://doi.org/10.1117/12.776863

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE