The Large Binocular Telescope azimuth and elevation encoder system

David S. Ashby; Tom Sargent; Dan Cox; Jerry Rosato; Joar G. Brynnel

doi:10.1117/12.790151

16 July 2008 The Large Binocular Telescope azimuth and elevation encoder system

David S. Ashby, Tom Sargent, Dan Cox, Jerry Rosato, Joar G. Brynnel

Proceedings Volume 7019, Advanced Software and Control for Astronomy II; 701920 (2008) https://doi.org/10.1117/12.790151
Event: SPIE Astronomical Telescopes + Instrumentation, 2008, Marseille, France

Abstract

A typical high-resolution encoder interpolator relies on careful mechanical alignment of the encoder read-heads and tight electrical tolerances of the signal processing electronics to ensure linearity. As the interpolation factor increases, maintaining these tight mechanical and electrical tolerances becomes impractical. The Large Binocular Telescope (LBT) is designed to utilize strip-type encoders on the main axes. Because of the very large scale of the telescope, the accumulative length of the azimuth and elevation encoder strips exceeds 80 meters, making optical tape prohibitively expensive. Consequently, the designers of the LBT incorporated the far less expensive Farrand Controls Inductosyn® linear strip encoder to encode the positions of the main axes and the instrument rotators. Since the cycle pitch of these encoders is very large compared to that of optical strip encoders, the interpolation factor must also be large in order to achieve the 0.005 arcsecond encoder resolution as specified. The authors present a description of the innovative DSP-based hardware / software solution that adaptively characterizes and removes common systematic cycle-to-cycle encoder interpolation errors. These errors can be caused by mechanical misalignment, encoder manufacturing flaws, variations in electrical gain, signal offset or cross-coupling of the encoder signals. Simulation data are presented to illustrate the performance of the interpolation algorithm, and telemetry data are presented to demonstrate the actual performance of the LBT main-axis encoder system.

Citation Download Citation

David S. Ashby, Tom Sargent, Dan Cox, Jerry Rosato, and Joar G. Brynnel "The Large Binocular Telescope azimuth and elevation encoder system", Proc. SPIE 7019, Advanced Software and Control for Astronomy II, 701920 (16 July 2008); https://doi.org/10.1117/12.790151

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available