Paper
27 February 2009 Lead-chalcogenide VECSELs on Si and BaF2 for 5 μm emission
M. Rahim, A. Khiar, F. Felder, M. Fill, D. Boye, H. Zogg
Author Affiliations +
Abstract
Optically pumped VECSELs (vertical external cavity surface emitting lasers) with above 5 μm emission wavelength were fabricated on BaF2 and Si substrates. The active layer is just 1 - 2 μm thick PbTe or PbSe, and epitaxial PbEuTe/BaF2 or PbSrTe/EuTe Bragg mirrors are employed. On BaF2 substrates, output powers up to 260 mW pulsed and 3 mW cw at 100 K are obtained. The VECSEL presently operate up to 175 K with PbTe, and up to 215 K with PbSe active layers. On Si-substrates, maximum output was about 30 mW. There is room for considerable improvement with better adapted designs including improved heat-removal precautions.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Rahim, A. Khiar, F. Felder, M. Fill, D. Boye, and H. Zogg "Lead-chalcogenide VECSELs on Si and BaF2 for 5 μm emission", Proc. SPIE 7193, Solid State Lasers XVIII: Technology and Devices, 71931G (27 February 2009); https://doi.org/10.1117/12.816359
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Silicon

Optical pumping

Quantum wells

Refractive index

Temperature metrology

Mid-IR

RELATED CONTENT

IV-VI mid-infrared VECSEL on Si-substrate
Proceedings of SPIE (February 14 2012)
OPS laser EPI design for different wavelengths
Proceedings of SPIE (February 27 2009)
IV VI mid IR tunable lasers and detectors with external...
Proceedings of SPIE (September 01 2009)
Optically pumped VECSEL operating at 1550 nm
Proceedings of SPIE (June 16 2004)
Ultralightweight silicon carbide mirror design
Proceedings of SPIE (November 11 1996)

Back to Top