Paper
30 April 2009 Rise-time enhancement techniques for resistive array infrared scene projectors
Greg Franks, Joe LaVeigne, Kevin Sparkman, Jim Oleson
Author Affiliations +
Abstract
Santa Barbara Infrared (SBIR) produces high performance resistive emitter arrays for its line of IR Scene Projectors (IRSPs). These arrays operate at frame rates up to 200 hertz. The inherent properties of the pixels can result in transitions between two temperatures that are more than the 5 millisecond frame time. Modifying the pixel drive level on a frame by frame basis can lead to improvements in the measured rise times. This paper describes a new capability developed by SBIR that improves the rise time of the pixels. It discusses the process by which array drive levels are modified to achieve quicker transitions together with test results showing improved rise time. In an example transition cited here, the risetime is reduced by more than a factor of two from 8.3 ms to 3.7 ms.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Greg Franks, Joe LaVeigne, Kevin Sparkman, and Jim Oleson "Rise-time enhancement techniques for resistive array infrared scene projectors", Proc. SPIE 7301, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing XIV, 73010L (30 April 2009); https://doi.org/10.1117/12.818392
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Time metrology

Infrared radiation

Projection systems

Calibration

Array processing

Scene simulation

Back to Top