Paper
11 May 2009 Hewlett Packard's inkjet MEMS technology: past, present, and future
J. Stasiak, S. Richards, S. Angelos
Author Affiliations +
Abstract
In 1985, HP introduced the ThinkJet - the first low-cost, mass-produced thermal inkjet printer. Providing a reasonable alternative to noisy dot matrix printers, ThinkJet set the stage for subsequent generations of HP thermal inkjet technology (TIJ). With each new generation, HP TIJ products provided new standards for print quality, color, and an unprecedented cost/performance ratio. Regarded as the first and most successful commercial MEMS technology, the development of HP's TIJ printheads required multidisciplinary innovation in fluid dynamics, bulk and surface micromachining, large-scale integration of electronics, packaging, and high volume MEMS manufacturing. HP's current TIJ printhead products combine Pentium-class addressing circuitry, high voltage mixed-signal driver electronics, dense electrical interconnects, and up to 3900 high-precision microfluidic devices - all on a single silicon chip. In this paper, we will provide a brief history of HP's TIJ technology and discuss how the unique capabilities that were required to advance the state-of-the-art of TIJ printheads are now providing a platform for the development of new MEMS devices and systems.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Stasiak, S. Richards, and S. Angelos "Hewlett Packard's inkjet MEMS technology: past, present, and future", Proc. SPIE 7318, Micro- and Nanotechnology Sensors, Systems, and Applications, 73180U (11 May 2009); https://doi.org/10.1117/12.819434
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microelectromechanical systems

Inkjet technology

Silicon

Printing

Microfluidics

Electronics

Resistors

RELATED CONTENT

System approach to MEMS commercialization
Proceedings of SPIE (August 23 2002)
Printing systems for MEMS packaging
Proceedings of SPIE (October 02 2001)
Evaporating two-phase flow mechanism in microchannels
Proceedings of SPIE (March 10 1999)
A superparamagnetic bead driven fluidic device
Proceedings of SPIE (July 01 2005)
Stable silicon resistors at 20 160 degrees C due to...
Proceedings of SPIE (April 29 2008)
MEMS sensor packaging using LTCC substrate technology
Proceedings of SPIE (November 21 2001)

Back to Top