Paper
5 August 2009 Fabrication of Ge-Se-Sb chalcogenide glass with large size and its MTF performance
S. Dai, M. Li, B. Peng, J. Zhu, X. Wang, X. Shen, L. Ding, T. Xu, Q. Nie
Author Affiliations +
Abstract
In this paper, the methods of preparation of Ge-Se-Sb glasses with low impurity content were developed, and a large Ge-Sb-Se glass rod (φ85×80mm) with good quality was obtained. The physical and optical properties of the glass were measured. The optical homogeneity (Δn) at 2μm at different places inside the same bulk was less ±2×10-4. In order to accurately evaluate the infrared resolution of our prepared glass, a lens of f 19mm F/#1.3 was used to evalue its modulation transfer function (MTF) performance. The MTF value at 20cycles/mm for 20°C was 0.52. The area under MTF curve covers 82.466% of the image space, and has a value of 21.8 cycles/mm.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Dai, M. Li, B. Peng, J. Zhu, X. Wang, X. Shen, L. Ding, T. Xu, and Q. Nie "Fabrication of Ge-Se-Sb chalcogenide glass with large size and its MTF performance", Proc. SPIE 7383, International Symposium on Photoelectronic Detection and Imaging 2009: Advances in Infrared Imaging and Applications, 738313 (5 August 2009); https://doi.org/10.1117/12.835328
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Glasses

Chalcogenide glass

Thermography

Infrared imaging

Optical properties

Infrared radiation

Back to Top