Paper
17 June 2009 Power spectral density specification and analysis of large optical surfaces
Author Affiliations +
Abstract
The 2-dimensional Power Spectral Density (PSD) can be used to characterize the mid- and the high-spatial frequency components of the surface height errors of an optical surface. We found it necessary to have a complete, easy-to-use approach for specifying and evaluating the PSD characteristics of large optical surfaces, an approach that allows one to specify the surface quality of a large optical surface based on simulated results using a PSD function and to evaluate the measured surface profile data of the same optic in comparison with those predicted by the simulations during the specification-derivation process. This paper provides a complete mathematical description of PSD error, and proposes a new approach in which a 2-dimensional (2D) PSD is converted into a 1-dimensional (1D) one by azimuthally averaging the 2D-PSD. The 1D-PSD calculated this way has the same unit and the same profile as the original PSD function, thus allows one to compare the two with each other directly.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erkin Sidick "Power spectral density specification and analysis of large optical surfaces", Proc. SPIE 7390, Modeling Aspects in Optical Metrology II, 73900L (17 June 2009); https://doi.org/10.1117/12.823844
Lens.org Logo
CITATIONS
Cited by 43 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Error analysis

Wavefronts

MATLAB

Spatial frequencies

Scattering

Statistical analysis

Astronomical imaging

Back to Top