Thin gold layer in Ni electroforming process: optical surface characterization

G. Sironi; D. Spiga; G. Pareschi; N. Missaglia; L. Paganini

doi:10.1117/12.838877

31 August 2009 Thin gold layer in Ni electroforming process: optical surface characterization

G. Sironi, D. Spiga, G. Pareschi, N. Missaglia, L. Paganini

Proceedings Volume 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV; 743718 (2009) https://doi.org/10.1117/12.838877
Event: SPIE Optical Engineering + Applications, 2009, San Diego, California, United States

Abstract

Mandrel replication by Nickel electroforming is a well-suited process to manufacture X-ray mirrors, making use of Gold layer playing the twofold role of release agent and reflective coating. To increase the optical performances of mirrors it is crucial to minimize the impact of X-ray scattering effects related to surface microroughness, especially when the mirror is intended to operate in hard X-rays. In this case, the Gold layer simply acts as release agent because the reflection is demanded to interferential over-coatings. Even though the replicated optical surface is usually believed to reproduce the smooth topography of the master, a surface degradation is commonly observed. Such a worsening can also suffer from a contribution from the spontaneous roughness growth of the Gold layer itself: if this is the case, the mirror's optical quality could potentially benefit from the utilization of a thin Gold layer (< 100 nm) instead of the traditional thick gold layer (> 100 nm). To prove the effectiveness of the Gold thickness reduction, a microroughness characterization of replicated thin gold layers has been achieved. We report here a preliminary roughness study of 3 electroformed Ni samples replicated from a super-polished Zerodur flat master with various Gold layer thicknesses, in the spectral range 0.02-1000 μm. The study is organized as follows: (a) characterization of the 3 replicated samples; (b) comparison of the Gold roughness for thin vs. thick layers; (c) comparison of the two sides of Gold layers.

Citation Download Citation

G. Sironi, D. Spiga, G. Pareschi, N. Missaglia, and L. Paganini "Thin gold layer in Ni electroforming process: optical surface characterization", Proc. SPIE 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV, 743718 (31 August 2009); https://doi.org/10.1117/12.838877

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
12 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Gold

Nickel

Atomic force microscopy

Mirrors

Spatial frequencies

X-rays

Surface roughness

Show All Keywords

Keywords/Phrases

Search In:

Publication Years