Paper
29 July 2010 Arc-second alignment and bonding of International X-Ray Observatory mirror segments
Author Affiliations +
Abstract
The optics for the International X-Ray Observatory (IXO) require alignment and integration of about fourteen thousand thin mirror segments to achieve the mission goal of 3.0 square meters of effective area at 1.25 keV with an angular resolution of five arc-seconds. These mirror segments are 0.4 mm thick, and 200 to 400 mm in size, which makes it hard not to impart distortion at the sub-arc-second level. This paper outlines the precise alignment, verification testing, and permanent bonding techniques developed at NASA's Goddard Space Flight Center (GSFC). These techniques are used to overcome the challenge of aligning thin mirror segments and bonding them with arc-second alignment and minimal figure distortion. Recent advances in technology development in the area of permanent bonding have produced significant results. This paper will highlight the recent advances in alignment, testing, and permanent bonding techniques as well as the results they have produced.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tyler C. Evans, Kai-Wing Chan, Ryan McClelland, and Timo Saha "Arc-second alignment and bonding of International X-Ray Observatory mirror segments", Proc. SPIE 7732, Space Telescopes and Instrumentation 2010: Ultraviolet to Gamma Ray, 77323Z (29 July 2010); https://doi.org/10.1117/12.856620
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

X-rays

Distortion

Epoxies

Observatories

Actuators

Sensors

RELATED CONTENT


Back to Top