Hyper Suprime-Cam: development of the CCD readout electronics

Hidehiko Nakaya; Tomohisa Uchida; Hironao Miyatake; Hiroki Fujimori; Sogo Mineo; Hiroaki Aihara; Hisanori Furusawa; Yukiko Kamata; Hiroshi Karoji; Satoshi Kawanomoto; Yutaka Komiyama; Satoshi Miyazaki; Tomoki Morokuma; Yoshiyuki Obuchi; Yuki Okura; Manobu Tanaka; Yoko Tanaka; Fumihiro Uraguchi; Yosuke Utsumi

doi:10.1117/12.856853

15 July 2010 Hyper Suprime-Cam: development of the CCD readout electronics

Hidehiko Nakaya, Tomohisa Uchida, Hironao Miyatake, Hiroki Fujimori, Sogo Mineo, Hiroaki Aihara, Hisanori Furusawa, Yukiko Kamata, Hiroshi Karoji, Satoshi Kawanomoto, Yutaka Komiyama, Satoshi Miyazaki, Tomoki Morokuma, Yoshiyuki Obuchi, Yuki Okura, Manobu Tanaka, Yoko Tanaka, Fumihiro Uraguchi, Yosuke Utsumi

Author Affiliations +

Proceedings Volume 7735, Ground-based and Airborne Instrumentation for Astronomy III; 77352P (2010) https://doi.org/10.1117/12.856853
Event: SPIE Astronomical Telescopes + Instrumentation, 2010, San Diego, California, United States

Abstract

Hyper Suprime-Cam (HSC) employs 116 of 2k×4k CCDs with 464 signal outputs in total. The image size exceeds 2 GBytes, and the data can be readout every 10 seconds which results in the data rate of 210 Mbytes / sec. The data is digitized to 16-bit. The readout noise of the electronics at the readout time of 20 seconds is ~0.9 ADU, and the one with CCD is ~1.5 ADU which corresponds to ~4.5 e. The linearity error fits within ± 0.5 % up to 150,000 e. The CCD readout electronics for HSC was newly developed based on the electronics for Suprime-Cam. The frontend electronics (FEE) is placed in the vacuum dewar, and the backend electronics (BEE) is mounted on the outside of the dewar on the prime focus unit. The FEE boards were designed to minimize the outgas and to maximize the heat transfer efficiency to keep the vacuum of the dewar. The BEE boards were designed to be simple and small as long as to achieve the readout time within 10 seconds. The production of the system has been finished, and the full set of the boards are being tested with several CCDs installed in the HSC dewar. We will show the system design, performance, and the current status of the development.

Citation Download Citation

Hidehiko Nakaya, Tomohisa Uchida, Hironao Miyatake, Hiroki Fujimori, Sogo Mineo, Hiroaki Aihara, Hisanori Furusawa, Yukiko Kamata, Hiroshi Karoji, Satoshi Kawanomoto, Yutaka Komiyama, Satoshi Miyazaki, Tomoki Morokuma, Yoshiyuki Obuchi, Yuki Okura, Manobu Tanaka, Yoko Tanaka, Fumihiro Uraguchi, and Yosuke Utsumi "Hyper Suprime-Cam: development of the CCD readout electronics", Proc. SPIE 7735, Ground-based and Airborne Instrumentation for Astronomy III, 77352P (15 July 2010); https://doi.org/10.1117/12.856853

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE