Paper
21 July 2010 Vibration damping system for ALMA antenna transporters
M. Dimmler, Max Kraus, Lothar Kern, Nicola Di Lieto
Author Affiliations +
Abstract
The two antenna transporters of the ALMA Observatory are used to relocate 12-meter antennas and to move them between low (3000m) and high altitude site (5000m). When analyzing the dynamic response of the transporters to road ripple of critical height and inter-distance, it turned out that transporter accelerations exceeding the seismic accelerations cannot be excluded. This is considered as a remote risk however with possibly catastrophic consequences for the equipped antennas. The problem was analyzed by ESO experts for dynamic simulations and an additional damping system was designed to limit the loads to acceptable values. This paper describes the design of the additional damping system including its concept, the model-based design using dynamic simulations and verification tests on site.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Dimmler, Max Kraus, Lothar Kern, and Nicola Di Lieto "Vibration damping system for ALMA antenna transporters", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 77391F (21 July 2010); https://doi.org/10.1117/12.856862
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Antennas

Roads

Sensors

Electronics

Nitrogen

Manufacturing

Observatories

RELATED CONTENT

Status of the JWST sunshield and spacecraft
Proceedings of SPIE (August 09 2016)
Atlid, ESA atmospheric lidar manufacture and test results of...
Proceedings of SPIE (September 25 2017)
First-light SOFIA instruments
Proceedings of SPIE (December 18 2002)
SAAO adaptive optics system
Proceedings of SPIE (May 04 2000)
Concept design study of the CCAT facilities
Proceedings of SPIE (June 23 2006)

Back to Top