Paper
18 May 2011 Flow cell with hybrid LPG and FBG optical fibre sensor for refractometric measurements
Author Affiliations +
Proceedings Volume 7753, 21st International Conference on Optical Fiber Sensors; 775392 (2011) https://doi.org/10.1117/12.885126
Event: 21st International Conference on Optical Fibre Sensors (OFS21), 2011, Ottawa, Canada
Abstract
The combination of a long period grating and a fiber Bragg grating written on the same fiber is described as method to reduce noticeably the interferences caused by strain and temperature in the measurement of refractive index. The hybrid LPG and FBG optical fiber sensor is manufactured and located in a small volume flow cell. The whole system with its flow cell and the gratings fabrication are extensively described as well as both the acquisition and data processing. The maximum sensor sensitivity and resolution are about 3120 nm/RIU and 2 x 10-5 RIU, respectively.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Baldini, M. Brenci, F. Chiavaioli, R. Falciai, and C. Trono "Flow cell with hybrid LPG and FBG optical fibre sensor for refractometric measurements", Proc. SPIE 7753, 21st International Conference on Optical Fiber Sensors, 775392 (18 May 2011); https://doi.org/10.1117/12.885126
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Temperature metrology

Refractive index

Sensors

Optical fibers

Polymethylmethacrylate

Fiber optics sensors

Back to Top