Paper
12 November 2010 High brightness InAs/GaAs quantum dot tapered laser at 1.3 μm with high temperature stability
Yu-Lian Cao, Peng-Fei Xu, Hai-Ming Ji, Tao Yang, Liang-Hui Chen
Author Affiliations +
Abstract
High brightness InAs/GaAs quantum dot tapered lasers at 1.3μm were first developed with high temperature stability. The devices consisted of a straight index-guided section formed by a ridge waveguide (RW) and a gain-guided tapered section. To enhance the mode filtering, a pair of cavity spoiling grooves had been included. For two different laser lengths L =1.5mm and 3mm with a constant full taper angle φTR = 4°, the length of the ridge waveguide section L2 was varied for 1.5 mm long devices, whose L2 was 0.5mm and 1 mm, respectively. In case of L=3 mm, the L2 was fixed at 1mm. For above-mentioned geometries, the light power (P) - current (I) characteristics and the beam quality factor (M2) were presented. The lasers with a smaller L2 have higher threshold current due to the larger area of the tapered section at fixed total length. The beam quality can be improved with longer L and L2 at fixed total length L. The M2 was lower than the value of 3 measured under different light power, moreover, the M2 increased with light power increasing. We also measured temperature dependence of threshold current for two kinds of lasers with L=1.5 and 3 mm. The threshold current was almost constant over a temperature range from 30 to 70°C. It is of important significance for the practical application because that the temperature range overlapped with the operating temperature range. In addition, temperature dependence of the M2 for the lasers with L=3 mm was also studied.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu-Lian Cao, Peng-Fei Xu, Hai-Ming Ji, Tao Yang, and Liang-Hui Chen "High brightness InAs/GaAs quantum dot tapered laser at 1.3 μm with high temperature stability", Proc. SPIE 7844, Semiconductor Lasers and Applications IV, 784404 (12 November 2010); https://doi.org/10.1117/12.869637
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Laser damage threshold

Quantum dots

Laser stabilization

Waveguides

Optical filters

Semiconductor lasers

Back to Top