Paper
9 September 2011 Surface imaging using optically controlled microrods
D. B. Phillips, H. Schäfer, M. Steinhart, M. J. Padgett, M. J. Miles, D. M. Carberry
Author Affiliations +
Abstract
We present an imaging technique using an optically trapped silica microrod probe controlled using holographic optical tweezers. The probe is raster scanned over a surface, allowing an image to be recorded in a manner analogous to scanning probe microscopy (SPM), with closed loop feedback control provided by high-speed CMOS camera image tracking. We demonstrate a proof of principle of this technique by imaging the surface of an oil droplet. We estimate the normal force exerted on the sample during imaging to be 1 pN. The resolution is limited by the diameter of the microrod tip, thermal motion of the probe and the tracking accuracy. As our technique is not diraction limited, there is scope for signicant improvement by reducing the tip diameter, and position clamping to reduce unwanted thermal motion.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. B. Phillips, H. Schäfer, M. Steinhart, M. J. Padgett, M. J. Miles, and D. M. Carberry "Surface imaging using optically controlled microrods", Proc. SPIE 8097, Optical Trapping and Optical Micromanipulation VIII, 809704 (9 September 2011); https://doi.org/10.1117/12.893796
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical tweezers

Image processing

Scanning probe microscopy

Holography

Silica

CMOS cameras

Image enhancement

Back to Top