Paper
23 September 2011 Evaluating the junction temperature of AC LEDs by DC and AC methods
Han-Kuei Fu, Kuang-Yu Tai, Chien-Ping Wang, Pei-Ting Chou
Author Affiliations +
Abstract
Alternating-current (AC) driven light-emitting diodes (LEDs) have become the trend of solid-state lighting (SSL) products. The junction temperature is an important index of LEDs reliability and efficiency. In other words, with proper thermal management of AC LEDs lighting products, the high performance of SSL products will be achieved. In order to obtain the junction temperature, we study and compare two published evaluating methods differentiating between the measurements of DC and AC in this paper. The first method is in which a low reference current having a pulse width was applied and the corresponding voltage across the device was measured and correlated to the junction temperature (Tj). The second method is using an active heat sink for recovering the root mean square (RMS) current of the first half cycle to estimate the junction temperature. The experimental evidence showed different aspects and variations of evaluating the AC LEDs junction temperature. The variations of evaluating junction temperature were caused by the switch time and phase of different source measurements in the first method and the capture time of the first half cycle in the second method. With proper capture time, the rising junction temperature in the second method might be negligible.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Han-Kuei Fu, Kuang-Yu Tai, Chien-Ping Wang, and Pei-Ting Chou "Evaluating the junction temperature of AC LEDs by DC and AC methods", Proc. SPIE 8123, Eleventh International Conference on Solid State Lighting, 812310 (23 September 2011); https://doi.org/10.1117/12.894690
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Temperature metrology

Solid state lighting

Calibration

Resistance

Light sources and illumination

Measurement devices

RELATED CONTENT

White LED performance
Proceedings of SPIE (October 20 2004)
Estimating the junction temperature of AC LEDs
Proceedings of SPIE (August 18 2010)
Methods for estimating junction temperature of AC LEDs
Proceedings of SPIE (September 23 2011)

Back to Top