Paper
15 February 2012 A high-speed, bimodal, CMOS-MEMS resonant scanner driven by temperature-gradient actuators
Sergio Camacho-León, Peter J. Gilgunn, Sergio O. Martínez-Chapa, Gary K. Fedder
Author Affiliations +
Proceedings Volume 8252, MOEMS and Miniaturized Systems XI; 82520V (2012) https://doi.org/10.1117/12.908751
Event: SPIE MOEMS-MEMS, 2012, San Francisco, California, United States
Abstract
This work reports the experimental validation of a novel one-dimensional microscanner. The composite cantilever device implements thermoelastic resonant actuation using temperature gradients induced across two frequency-selective directions as a strategy to increase operating speed and decrease damping. The device was fabricated using 0.35-μm CMOS technology and aspect ratio dependent etch modulation. Resonance peaks were measured around 6.4 and 44.7 kHz at atmospheric-pressure conditions; the power sensitivities (2.8 and 1.6 °/W) of the device may compromise its performance for low-power, large-angle applications. Ultimately, the device is suitable for applications requiring a variation from low- to high-stability conditions with increasing operating speed.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sergio Camacho-León, Peter J. Gilgunn, Sergio O. Martínez-Chapa, and Gary K. Fedder "A high-speed, bimodal, CMOS-MEMS resonant scanner driven by temperature-gradient actuators", Proc. SPIE 8252, MOEMS and Miniaturized Systems XI, 82520V (15 February 2012); https://doi.org/10.1117/12.908751
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxides

Scanners

Metals

Actuators

Microopto electromechanical systems

Etching

Thermal effects

RELATED CONTENT


Back to Top