Mode area scaling for high-power fiber lasers with all-solid photonic bandgap fibers

Liang Dong; Kunimasa Saitoh; Fanting Kong; Paul Foy; Thomas Hawkins; Devon McClane

doi:10.1117/12.921225

23 May 2012 Mode area scaling for high-power fiber lasers with all-solid photonic bandgap fibers

Liang Dong, Kunimasa Saitoh, Fanting Kong, Paul Foy, Thomas Hawkins, Devon McClane

Proceedings Volume 8381, Laser Technology for Defense and Security VIII; 838106 (2012) https://doi.org/10.1117/12.921225
Event: SPIE Defense, Security, and Sensing, 2012, Baltimore, Maryland, United States

Abstract

There are very strong interests for power scaling in high power fiber lasers for a wide range of applications in medical, industry, defense and science. In many of these lasers, fiber nonlinearities are the main limits to further scaling. Although numerous specific techniques have studied for the suppression of the wide range of nonlinearities, the fundamental solution is scaling mode areas in fibers while maintaining sufficient single mode operation. Here the key problem is that more modes are supported once physical dimensions of waveguides are increased. There are two basic approaches, lower refractive index contrast to counter the increase of waveguide dimension or/and introduction of additional losses to suppress higher order modes. Lower index contrast leads to weak waveguides, resulting in fibers no longer being coil-able. Our research has been focused on designs for significant higher mode suppression. In conventional waveguides, modes are increasingly guided in the center of the waveguides when waveguide dimensions are increased. It is hard to couple the modes out to suppress them. This severely limits the scalability of all designs based conventional fibers. In an all-solid photonic bandgap fiber, modes are guided due to anti-resonance of cladding photonic crystal lattice. This leads strongly mode-dependent guidance. Our theoretical study has shown that it can have some of the highest differential mode losses among all designs with equivalent mode areas. Our design and experimental works have shown the potential of this approach for all-glass fibers with >50μm core which can be coiled for high power applications.

Citation Download Citation

Liang Dong, Kunimasa Saitoh, Fanting Kong, Paul Foy, Thomas Hawkins, and Devon McClane "Mode area scaling for high-power fiber lasers with all-solid photonic bandgap fibers", Proc. SPIE 8381, Laser Technology for Defense and Security VIII, 838106 (23 May 2012); https://doi.org/10.1117/12.921225

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available