Paper
11 May 2012 Towards high-quality optical ceramic YAG fibers for high-energy laser (HEL) applications
HeeDong Lee, Kristin Keller, Brian Sirn
Author Affiliations +
Abstract
There is a critical demand for high quality, transparent ceramic YAG fibers for high powered fiber lasers. The production of laser quality ceramic fibers hinges on advanced ceramic processing technology, along with the availability of highly sinterable powder with high phase and chemical purity. These two fundamental technologies have been successfully developed at UES. Nd (1.1 a/o) and Yb (1.0 a/o)-doped yttrium aluminum garnet (YAG) fibers with high optical quality were produced by combining UES's tailored powders with advanced consolidation processes including fiber extrusion and vacuum sintering. The as-sintered and as-annealed fibers, approximately 30 microns in diameter, appeared transparent and successfully transmitted laser beams; further development will allow for the production of doped ceramic YAG fiber lasers for advanced high power and high energy fiber laser systems.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
HeeDong Lee, Kristin Keller, and Brian Sirn "Towards high-quality optical ceramic YAG fibers for high-energy laser (HEL) applications", Proc. SPIE 8381, Laser Technology for Defense and Security VIII, 838113 (11 May 2012); https://doi.org/10.1117/12.922770
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

YAG lasers

Ceramics

Fiber lasers

Transparency

Neodymium

Ytterbium

Back to Top