Paper
7 November 2012 Sensitivity enhancement in photonic crystal fiber interferometer
Sun-jie Qiu, Ye Chen
Author Affiliations +
Proceedings Volume 8421, OFS2012 22nd International Conference on Optical Fiber Sensors; 84216V (2012) https://doi.org/10.1117/12.968583
Event: OFS2012 22nd International Conference on Optical Fiber Sensor, 2012, Beijing, China
Abstract
In this paper, we demonstrated two methods to enhance refractive index (RI) and temperature sensitivity of a photonic crystal fiber (PCF) in-line modal interferometer built via fusion splicing, respectively. First we fabricated a tapered PCF interferometer by an etching method with acid microdroplets. The RI sensitivity greatly increases (5 times) and the size decreases after tapering the PCF, while the temperature sensitivity does not change a lot. Then we obtained another PCF interferometer by inserting a short isopropanol-filled PCF between two single mode fibers (SMFs). The temperature sensitivity increases over an order of magnitude compared with the previous non-polarimetric sensors based on air-filled PCF interferometers.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sun-jie Qiu and Ye Chen "Sensitivity enhancement in photonic crystal fiber interferometer", Proc. SPIE 8421, OFS2012 22nd International Conference on Optical Fiber Sensors, 84216V (7 November 2012); https://doi.org/10.1117/12.968583
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Single mode fibers

Refractive index

Etching

Temperature metrology

Thermal optics

Photonic crystal fibers

Back to Top