Paper
8 May 2012 Tapered fiber phase conjugator for high-power all-solid lasers with high repetition rate
Chun Tang, Lixin Tong, Gang Xie, Qingsong Gao, Lingling Cui, ZhiGang Zhao, Chong Liu, Jun Chen
Author Affiliations +
Abstract
A high power multi-pass diode-pumped solid-state MOPA system with large core diameter tapered quartz fiber as phase conjugator is experimentally investigated. The results of the effects of laser longitudinal mode characteristic, laser pulse width and fiber surface optical quality on SBS reflectivity are presented. Maximum SBS reflectivity of 69.7% is obtained with the repetition rate of 1000 Hz, input pulse energy of 38mJ and pulse width of 24 ns. The phase conjugator is made from a taper shaped quartz fiber with the diameter of 1mm at the input end and 0.4mm at the other end. It has good application prospects in improving the beam quality and compressing the pulse width for high power laser system with high repetition rate.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chun Tang, Lixin Tong, Gang Xie, Qingsong Gao, Lingling Cui, ZhiGang Zhao, Chong Liu, and Jun Chen "Tapered fiber phase conjugator for high-power all-solid lasers with high repetition rate", Proc. SPIE 8433, Laser Sources and Applications, 843318 (8 May 2012); https://doi.org/10.1117/12.923197
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Fiber lasers

Pulsed laser operation

Laser systems engineering

Quartz

Laser induced damage

Oscillators

Back to Top