Paper
13 September 2012 The mechanism of charge generation in charge generation units containing HATCN for high-luminance tandem OLED display
Sunghun Lee, Jeong-Hwan Lee, Jae-Hyun Lee, Jang-Joo Kim
Author Affiliations +
Abstract
We report the rate limiting step of charge generation in the charge generation units (CGUs) composed of a p-HTL, HATCN and n-doped electron transporting layer (n-ETL) where TAPC was used as the HTL. Energy level alignment determined by the capacitance-voltage (C-V) measurements and the current density-voltage characteristics of the structure clearly showed that the electron injection at the HATCN/n-ETL junction limits the charge generation in the CGUs rather than charge generation itself at the p-HTL/HATCN junction. Consequently, the CGUs with 30 mol% Rb2CO3 doped BPhen formed with the HATCN layer generates charges very efficiently and the excess voltage required to generate the current density of ±10 mA/cm2 was around 0.17 V, which is extremely small compared with the literature values reported up to now.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sunghun Lee, Jeong-Hwan Lee, Jae-Hyun Lee, and Jang-Joo Kim "The mechanism of charge generation in charge generation units containing HATCN for high-luminance tandem OLED display", Proc. SPIE 8476, Organic Light Emitting Materials and Devices XVI, 84761N (13 September 2012); https://doi.org/10.1117/12.929559
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capacitance

Organic light emitting diodes

Electron transport

Data modeling

Glasses

Interfaces

Measurement devices

Back to Top