Paper
31 May 2013 Ranging and target detection performance through lossy media using an ultrawideband S-band through-wall sensing noise radar
Sonny Smith, Ram M. Narayanan
Author Affiliations +
Abstract
An S-band noise radar has been developed for through-wall ranging and tracking of targets. Ranging to target is achieved by the cross-correlation between the time-delayed reflected return signal and the replica of the transmit signal; both are bandlimited ultrawideband (UWB) noise signals. Furthermore, successive scene subtraction allows for target tracking using the range profiles created by the cross-correlation technique. In this paper, we explore the performance of the radar system for target detection through varied, lossy media (e.g. a 4-inch thick brick wall and an 8-inch thick cinder-block wall) via correlation measurements using the S-band radar system. Moreover, we present a qualitative analysis of the S-band noise radar as operated under disparate testing configurations (i.e. different walls, targets, and distances.) with different antennas (e.g. dual polarized horns, helical antennas with different ground planes, etc.). In addition, we discuss key concepts of the noise radar design, considerations for an antenna choice, as well as experimental results for a few scenarios.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sonny Smith and Ram M. Narayanan "Ranging and target detection performance through lossy media using an ultrawideband S-band through-wall sensing noise radar", Proc. SPIE 8714, Radar Sensor Technology XVII, 871408 (31 May 2013); https://doi.org/10.1117/12.2016648
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Antennas

Radar

Target detection

S band

Interference (communication)

Ranging

Polarization

Back to Top