A miniaturised autonomous sensor based on nanowire materials platform: the SiNAPS mote

Naser Koshro Pour; Maher Kayal; Guobin Jia; Bjoern Eisenhawer; Fritz Falk; Adrian Nightingale; John C. DeMello; Yordan M. Georgiev; Nikolay Petkov; Justin D. Holmes; Michael Nolan; Giorgos Fagas

doi:10.1117/12.2017520

17 May 2013 A miniaturised autonomous sensor based on nanowire materials platform: the SiNAPS mote

Naser Koshro Pour, Maher Kayal, Guobin Jia, Bjoern Eisenhawer, Fritz Falk, Adrian Nightingale, John C. DeMello, Yordan M. Georgiev, Nikolay Petkov, Justin D. Holmes, Michael Nolan, Giorgos Fagas

Author Affiliations +

Proceedings Volume 8763, Smart Sensors, Actuators, and MEMS VI; 87631Q (2013) https://doi.org/10.1117/12.2017520
Event: SPIE Microtechnologies, 2013, Grenoble, France

Abstract

A micro-power energy harvesting system based on core(crystalline Si)-shell(amorphous Si) nanowire solar cells together with a nanowire-modified CMOS sensing platform have been developed to be used in a dust-sized autonomous chemical sensor node. The mote (SiNAPS) is augmented by low-power electronics for power management and sensor interfacing, on a chip area of 0.25mm². Direct charging of the target battery (e.g., NiMH microbattery) is achieved with end-to-end efficiencies up to 90% at AM1.5 illumination and 80% under 100 times reduced intensity. This requires matching the voltages of the photovoltaic module and the battery circumventing maximum power point tracking. Single solar cells show efficiencies up to 10% under AM1.5 illumination and open circuit voltages, V_oc, of 450-500mV. To match the battery’s voltage the miniaturised solar cells (~1mm² area) are connected in series via wire bonding. The chemical sensor platform (mm² area) is set up to detect hydrogen gas concentration in the low ppm range and over a broad temperature range using a low power sensing interface circuit. Using Telran TZ1053 radio to send one sample measurement of both temperature and H₂ concentration every 15 seconds, the average and active power consumption for the SiNAPS mote are less than 350nW and 2.1 μW respectively. Low-power miniaturised chemical sensors of liquid analytes through microfluidic delivery to silicon nanowires are also presented. These components demonstrate the potential of further miniaturization and application of sensor nodes beyond the typical physical sensors, and are enabled by the nanowire materials platform.

Citation Download Citation

Naser Koshro Pour, Maher Kayal, Guobin Jia, Bjoern Eisenhawer, Fritz Falk, Adrian Nightingale, John C. DeMello, Yordan M. Georgiev, Nikolay Petkov, Justin D. Holmes, Michael Nolan, and Giorgos Fagas "A miniaturised autonomous sensor based on nanowire materials platform: the SiNAPS mote", Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI, 87631Q (17 May 2013); https://doi.org/10.1117/12.2017520

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available