Paper
22 June 2013 A study on the yellow ring distribution of MR-16 WLED triplet lens module
Ching-Ching Yang, Hsin-Yi Tsai, Yi-Ju Chen, Kuo-Cheng Huang
Author Affiliations +
Proceedings Volume 8769, International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN2013); 876932 (2013) https://doi.org/10.1117/12.2018938
Event: International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN2013), 2013, Singapore, Singapore
Abstract
The yellow-ring (YR) is a chromatism phenomenon which is caused by the inhomogeneous phosphor layer of the whitelight LED (WLED) and can be observed from the projected WLED lightspot. In general, the lights emitted from a WLED will focus on the specific range to form a circular lightspot; in the meanwhile, the YR will appear on the periphery of this lightspot. In our previous study, the evaluation of YR phenomenon was graded by the YR index (YRI), which is the product of the yellow light intensity (Y) and total light intensity (I). Therein, the maximum value of YRI is a crucial optical parameter for determining the YR degree and a YR evaluation model is as the criterion for quality control of WLED. In this article, the YR distribution of MR-16 triplet lens module related to the distance (pitch) between two of three WLEDs will be discussed. Experimental results show that the YRI of triple lens WLED module is lower than one of single lens WLED module due to the overlapped effect of WLED lightspots. In addition, the YR degree of triplet lens WLED module will be lower if the pitch is longer, but the unintended dark-corner effect will appear when the pitch is enough longer.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ching-Ching Yang, Hsin-Yi Tsai, Yi-Ju Chen, and Kuo-Cheng Huang "A study on the yellow ring distribution of MR-16 WLED triplet lens module", Proc. SPIE 8769, International Conference on Optics in Precision Engineering and Nanotechnology (icOPEN2013), 876932 (22 June 2013); https://doi.org/10.1117/12.2018938
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light sources and illumination

Lamps

Light emitting diodes

Lens design

Reflectors

Halogens

Manufacturing

RELATED CONTENT

Solving the wall wash problem with a single lens
Proceedings of SPIE (December 29 2014)
White LED sources for vehicle forward lighting
Proceedings of SPIE (November 26 2002)
Automotive LED lamp lighted appearance
Proceedings of SPIE (May 14 2001)

Back to Top