A new hyperspectral imaging based device for quality control in plastic recycling

G. Bonifazi; M. D'Agostini; A. Dall'Ava; S. Serranti; F. Turioni

doi:10.1117/12.2014909

3 May 2013 A new hyperspectral imaging based device for quality control in plastic recycling

G. Bonifazi, M. D'Agostini, A. Dall'Ava, S. Serranti, F. Turioni

Proceedings Volume 8774, Optical Sensors 2013; 87741M (2013) https://doi.org/10.1117/12.2014909
Event: SPIE Optics + Optoelectronics, 2013, Prague, Czech Republic

Abstract

The quality control of contamination level in the recycled plastics stream has been identified as an important key factor for increasing the value of the recycled material by both plastic recycling and compounder industries. Existing quality control methods for the detection of both plastics and non-plastics contaminants in the plastic waste streams at different stages of the industrial process (e.g. feed, intermediate and final products) are currently based on the manual collection from the stream of a sample and on the subsequent off-line laboratory analyses. The results of such analyses are usually available after some hours, or sometimes even some days, after the material has been processed. The laboratory analyses are time-consuming and expensive (both in terms of equipment cost and their maintenance and of labour cost).Therefore, a fast on-line assessment to monitor the plastic waste feed streams and to characterize the composition of the different plastic products, is fundamental to increase the value of secondary plastics. The paper is finalized to describe and evaluate the development of an HSI-based device and of the related software architectures and processing algorithms for quality assessment of plastics in recycling plants, with particular reference to polyolefins (PO). NIR-HSI sensing devices coupled with multivariate data analysis methods was demonstrated as an objective, rapid and non-destructive technique that can be used for on-line quality and process control in the recycling process of POs. In particular, the adoption of the previous mentioned HD&SW integrated architectures can provide a solution to one of the major problems of the recycling industry, which is the lack of an accurate quality certification of materials obtained by recycling processes. These results could therefore assist in developing strategies to certify the composition of recycled PO products.

Citation Download Citation

G. Bonifazi, M. D'Agostini, A. Dall'Ava, S. Serranti, and F. Turioni "A new hyperspectral imaging based device for quality control in plastic recycling", Proc. SPIE 8774, Optical Sensors 2013, 87741M (3 May 2013); https://doi.org/10.1117/12.2014909

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available