Modeling the electromechanical and strain response of carbon nanotube-based nanocomposites

Bo Mi Lee; Kenneth J. Loh; Andrew R Burton; Bryan R. Loyola

doi:10.1117/12.2044566

10 April 2014 Modeling the electromechanical and strain response of carbon nanotube-based nanocomposites

Bo Mi Lee, Kenneth J. Loh, Andrew R Burton, Bryan R. Loyola

Proceedings Volume 9061, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2014; 906117 (2014) https://doi.org/10.1117/12.2044566
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014, San Diego, California, United States

Abstract

Over the last few decades, carbon nanotube (CNT)-based thin films or nanocomposites have been widely investigated as a multifunctional material. The proposed applications extend beyond sensing, ultra-strong coatings, biomedical grafts, and energy harvesting, among others. In particular, thin films characterized by a percolated and random distribution of CNTs within a flexible polymeric matrix have been shown to change its electrical properties in response to applied strains. While a plethora of experimental work has been conducted, modeling their electromechanical response remains challenging. Furthermore, their design and optimization require the derivation of accurate electromechanical models that could predict thin film response to applied strains. Thus, the objective of this study is to implement a percolation-based piezoresistive model that could explain the underlying mechanisms for strain sensing. First, a percolation-based model with randomly distributed, straight CNTs was developed in MATLAB. Second, the number of CNTs within a unit area was varied to explore its influence on percolation probability. Then, to understand how the film’s electrical properties respond to strain, two different models were implemented. Both models calculated the geometrical response of the film and CNTs due to applied uniaxial strains. The first model considered the fact that the electrical resistance of individual CNTs changed depending solely on its length between junctions. The other model further explored the idea of incorporating strain sensitivity of individual CNTs. The electromechanical responses and the strain sensitivities of the two models were compared by calculating how their bulk resistance varied due to applied tensile and compressive strains. The numerical model results were then qualitatively compared to experimental results reported in the literature.

Citation Download Citation

Bo Mi Lee, Kenneth J. Loh, Andrew R Burton, and Bryan R. Loyola "Modeling the electromechanical and strain response of carbon nanotube-based nanocomposites ", Proc. SPIE 9061, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2014, 906117 (10 April 2014); https://doi.org/10.1117/12.2044566

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available