Paper
21 July 2014 The VORTEX project: first results and perspectives
Olivier Absil, Dimitri Mawet, Christian Delacroix, Pontus Forsberg, Mikael Karlsson, Serge Habraken, Jean Surdej, Pierre-Antoine Absil, Brunella Carlomagno, Valentin Christiaens, Denis Defrère, Carlos Gomez Gonzalez, Elsa Huby, Aïssa Jolivet, Julien Milli, Pierre Piron, Ernesto Vargas Catalan, Marc Van Droogenbroeck
Author Affiliations +
Abstract
Vortex coronagraphs are among the most promising solutions to perform high contrast imaging at small angular separations from bright stars. They feature a very small inner working angle (down to the diffraction limit of the telescope), a clear 360 degree discovery space, have demonstrated very high contrast capabilities, are easy to implement on high-contrast imaging instruments, and have already been extensively tested on the sky. Since 2005, we have been designing, developing and testing an implementation of the charge-2 vector vortex phase mask based on concentric sub-wavelength gratings, referred to as the Annular Groove Phase Mask (AGPM). Science-grade mid-infrared AGPMs were produced in 2012 for the first time, using plasma etching on synthetic diamond substrates. They have been validated on a coronagraphic test bench, showing broadband peak rejection up to 500:1 in the L band, which translates into a raw contrast of about 6 x 10-5 at 2λ=D. Three of them have now been installed on world-leading diffraction-limited infrared cameras, namely VLT/NACO, VLT/VISIR and LBT/LMIRCam. During the science verification observations with our L-band AGPM on NACO, we observed the beta Pictoris system and obtained unprecedented sensitivity limits to planetary companions down to the diffraction limit (0:1”). More recently, we obtained new images of the HR 8799 system at L band during the AGPM first light on LMIRCam. After reviewing these first results obtained with mid-infrared AGPMs, we will discuss the short- and mid-term goals of the on-going VORTEX project, which aims to improve the performance of our vortex phase masks for future applications on second-generation high-contrast imager and on future extremely large telescopes (ELTs). In particular, we will briefly describe our current efforts to improve the manufacturing of mid-infrared AGPMs, to push their operation to shorter wavelengths, and to provide deeper starlight extinction by creating new designs for higher topological charge vortices. Within the VORTEX project, we also plan to develop new image processing techniques tailored to coronagraphic images, and to study some pre- and post-coronagraphic concepts adapted to the vortex coronagraph in order to reduce scattered starlight in the final images.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Olivier Absil, Dimitri Mawet, Christian Delacroix, Pontus Forsberg, Mikael Karlsson, Serge Habraken, Jean Surdej, Pierre-Antoine Absil, Brunella Carlomagno, Valentin Christiaens, Denis Defrère, Carlos Gomez Gonzalez, Elsa Huby, Aïssa Jolivet, Julien Milli, Pierre Piron, Ernesto Vargas Catalan, and Marc Van Droogenbroeck "The VORTEX project: first results and perspectives", Proc. SPIE 9148, Adaptive Optics Systems IV, 91480M (21 July 2014); https://doi.org/10.1117/12.2055702
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coronagraphy

Etching

Mid-IR

L band

Manufacturing

Spiral phase plates

Diamond

RELATED CONTENT


Back to Top