Preparation of flexible TiO2 photoelectrodes for dye-sensitized solar cells

Wen-Ren Li; Hsiu-Hsuan Wang; Chia-Feng Lin; Chaochin Su

doi:10.1117/12.2063877

9 September 2014 Preparation of flexible TiO₂ photoelectrodes for dye-sensitized solar cells

Wen-Ren Li, Hsiu-Hsuan Wang, Chia-Feng Lin, Chaochin Su

Proceedings Volume 9165, Physical Chemistry of Interfaces and Nanomaterials XIII; 91651O (2014) https://doi.org/10.1117/12.2063877
Event: SPIE NanoScience + Engineering, 2014, San Diego, California, United States

Abstract

Dye-sensitized solar cells (DSSCs) based on nanocrystalline TiO₂ photoelectrodes on indium tin oxide (ITO) coated polymer substrates have drawn great attention due to its lightweight, flexibility and advantages in commercial applications. However, the thermal instability of polymer substrates limits the process temperature to below 150 °C. In order to assure high and firm interparticle connection between TiO₂ nanocrystals (TiO₂-NC) and polymer substrates, the post-treatment of flexible TiO₂ photoelectrodes (F-TiO₂-PE) by mechanical compression was employed. In this work, Degussa P25 TiO₂-NC was mixed with tert-butyl alcohol and DI-water to form TiO₂ paste. F-TiO₂-PE was then prepared by coating the TiO2 paste onto ITO coated polyethylene terephthalate (PET) substrate using doctor blade followed by low temperature sintering at 120 °C for 2 hours. To study the effect of mechanical compression, we applied 50 and 100 kg/cm2 pressure on TiO₂/PET to complete the fabrication of F-TiO₂-PE. The surface morphology of F-TiO₂-PE was characterized using scanning electron microscopy. The resultant F-TiO₂-PE sample exhibited a smooth, crack-free structure indicating the great improvement in the interparticle connection of TiO₂-NC. Increase of compression pressure could lead to the increase of DSSC photoconversion efficiency. The best photoconversion efficiency of 4.19 % (open circuit voltage (Voc) = 0.79 V, short-circuit photocurrent density (Jsc) = 7.75 mA/cm2, fill factor (FF) = 0.68) was obtained for the F-TiO₂-PE device, which showed great enhancement compared with the F-TiO₂-PE cell without compression treatment. The effect of compression in DSSC performance was vindicated by the electrochemical impedance spectroscopy measurement.

Citation Download Citation

Wen-Ren Li, Hsiu-Hsuan Wang, Chia-Feng Lin, and Chaochin Su "Preparation of flexible TiO₂ photoelectrodes for dye-sensitized solar cells", Proc. SPIE 9165, Physical Chemistry of Interfaces and Nanomaterials XIII, 91651O (9 September 2014); https://doi.org/10.1117/12.2063877

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Titanium dioxide

Dye sensitized solar cells

Electrodes

Scanning electron microscopy

Polymers

Indium

Platinum

Show All Keywords

Keywords/Phrases

Search In:

Publication Years