Terahertz superconducting hot electron bolometers: technological issues and predicted mixer performance for Y-Ba-Cu-O devices

Romain G. Ladret; Alain J. Kreisler; Annick F. Dégardin

doi:10.1117/12.2066859

7 October 2014 Terahertz superconducting hot electron bolometers: technological issues and predicted mixer performance for Y-Ba-Cu-O devices

Romain G. Ladret, Alain J. Kreisler, Annick F. Dégardin

Author Affiliations +

Proceedings Volume 9252, Millimetre Wave and Terahertz Sensors and Technology VII; 92520R (2014) https://doi.org/10.1117/12.2066859
Event: SPIE Security + Defence, 2014, Amsterdam, Netherlands

Abstract

High-TC superconducting (HTS) hot electron bolometers (HEB) are promising THz mixers due to their large expected bandwidth and low local oscillator (LO) power requirements at 60-80 K operating temperature. To obtain HEB efficient mixing, it is mandatory to grow very thin high quality HTS films leading to good micro or nano-bolometer superconducting properties. The challenge for Y-Ba-Cu-O resides, however, in the chemical reactivity of the material and the related aging effects. Early HEB models described the device in terms of thermal reservoirs only, namely the electrons and the phonons of the superconductor. The electron-phonon interaction time, which drives the HEB mixer ultimate response, is 1-2 ps for Y-Ba-Cu-O, with an expected bandwidth close to 100 GHz. Recently, we introduced the hot spot model for Y-Ba-Cu-O HEBs, taking - more realistically - the spatial dependence of the electron temperature along the nano-bolometer (or constriction) length into account. From DC analysis, the I-V characteristics could be deduced. In this paper, we further consider a full description of the constriction impedance at THz frequencies, which allows to work out the mixer performance in terms of double sideband noise temperature TDSB and conversion gain G. For a constriction of technologically achievable dimensions, i.e., 400 nm long x 400 nm wide x 35 nm thick, minimum T_DSB = 1900 K at 9 μW LO power, with G = -9.5 dB, is obtained at 400 GHz, assuming impedance matching with a selfcomplementary planar antenna.

Citation Download Citation

Romain G. Ladret, Alain J. Kreisler, and Annick F. Dégardin "Terahertz superconducting hot electron bolometers: technological issues and predicted mixer performance for Y-Ba-Cu-O devices", Proc. SPIE 9252, Millimetre Wave and Terahertz Sensors and Technology VII, 92520R (7 October 2014); https://doi.org/10.1117/12.2066859

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available