Paper
13 November 2014 Optical fiber power measurement using different transfer standards
Author Affiliations +
Abstract
A comparison of different transfer standard optical fiber power detectors is present. Traceable to cryogenic radiometer, these planar, focus-planar and trap detectors have different characteristics during the optical fiber power values transfer because of the different input angles or fiber connectors. For different types of fibers and fiber connectors, a new trap detector is capable for the optical fiber power measurement, which has very little sensitivity for a variety of input conditions. Comparison of fiber power measurement using a planar and a trap detector is present by employing a three-lens method. A good agreement between the two types of detectors shows the feasibility of fiber power transfer using planar detectors.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nan Xu, Haiyong Gan, Jianwei Li, Zhixin Zhang, and Jian Li "Optical fiber power measurement using different transfer standards", Proc. SPIE 9276, Optical Metrology and Inspection for Industrial Applications III, 927615 (13 November 2014); https://doi.org/10.1117/12.2073687
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Optical fibers

Calibration

Transmittance

Photodiodes

Radiometry

Optical testing

Back to Top