Paper
2 September 2014 Simulation analysis of on-orbit adjustment and compensation for large aperture optical system
Author Affiliations +
Proceedings Volume 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 928003 (2014) https://doi.org/10.1117/12.2068711
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
With the uprating requirements of space remote sensing, the aperture of the optical remote sensor is getting larger and larger. The influences of both the support of optical elements and gravity deformation on the optical system are difficult to conquer. Therefore, it is necessary to compensate the descending optical performance which is caused by the surface error of primary mirror by means of adjusting the position parameters of the optical elements on-orbit. A large aperture coaxial three-mirror optical system is introduced in the paper. Matlab and MetroPro are used to simulate the surface error of the primary mirror. The surface error of the primary mirror is compensated by adjusting the position freedoms of the secondary mirror. The results show that the adjustment of the position freedoms of the secondary mirror can compensate both the coma and some astigmatism of the primary mirror, but not the spherical aberration.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianfeng Liu, Bo Li, Dewei Sun, Ningjuan Ruan, and Feng Zhou "Simulation analysis of on-orbit adjustment and compensation for large aperture optical system", Proc. SPIE 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 928003 (2 September 2014); https://doi.org/10.1117/12.2068711
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Monochromatic aberrations

Modulation transfer functions

Zernike polynomials

Error analysis

Wavefronts

Optical components

Back to Top