Paper
19 February 2015 Deep ultra-violet beam profile measurement of KrF laser using laser induced fluorescence
Caihong Ma, Zhixing Gao
Author Affiliations +
Proceedings Volume 9449, The International Conference on Photonics and Optical Engineering (icPOE 2014); 944911 (2015) https://doi.org/10.1117/12.2085055
Event: The International Conference on Photonics and Optical Engineering and the Annual West China Photonics Conference (icPOE 2014), 2014, Xi'an, China
Abstract
Abstract: An instrument was built to measure the output fluorescence response characteristics of a 248nm KrF laser using 4mm-thick fluorescent glass as a screen. Experiments show when irradiated laser intensity is no more than 0.7J/cm2, the fluorescent response is linear. And the fluorescent spot intensity distribution was spatial coherent with the output beam profile distribution of the LPX-150. So we can use high-homogeneity optical glasses as fluorescence wavelength conversion material in beam profile measurements.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Caihong Ma and Zhixing Gao "Deep ultra-violet beam profile measurement of KrF laser using laser induced fluorescence", Proc. SPIE 9449, The International Conference on Photonics and Optical Engineering (icPOE 2014), 944911 (19 February 2015); https://doi.org/10.1117/12.2085055
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser induced fluorescence

Glasses

Luminescence

Optical testing

Ultraviolet radiation

Charge-coupled devices

Laser energy

Back to Top