Paper
15 May 2015 Spectral homogenization techniques for the hyperspectral image projector
Logan E. Hillberry, Joseph P. Rice
Author Affiliations +
Abstract
In an effort to improve technology for performance testing and calibration of multispectral and hyperspectral imagers, the National Institute of Standards and Technology (NIST) has been developing a Hyperspectral Image Projector (HIP) capable of projecting dynamic scenes than include distinct, programmable spectra in each of its 1024x768 spatial pixels. The HIP is comprised of a spectral engine, which is a light source capable generating the spectra in the scene, coupled to a spatial engine, capable of projecting the spectra into the correct locations of the scene. In the prototype HIP, the light exiting the Visible-Near-Infrared (VNIR) / Short-Wavelength Infrared (SWIR) spectral engine is spectrally dispersed and needs to be spectrally homogenized before it enters the spatial engine. In this paper we describe the results from a study of several different techniques for performing this spectral homogenization. These techniques include an integrating sphere, a liquid light guide, a randomized fiber bundle, and an engineered diffuser, in various combinations. The spectral uniformity of projected HIP scenes is measured and analyzed using the spectral angle mapper (SAM) algorithm over the VNIR spectral range. The SAM provides a way to analyze the spectral uniformity independently from the radiometric uniformity. The goal of the homogenizer is a spectrally uniform and bright projected image. An integrating sphere provides the most spectrally uniform image, but at a great loss of light compared with the other methods. The randomized fiber bundle generally outperforms the liquid light guide in both spectral homogenization and brightness. Using an engineered diffuser with the randomized fiber bundle increases the spectral uniformity by a factor of five, with a decrease in brightness by a factor of five, compared with the randomized fiber bundle alone. The combination of an engineered diffuser with a randomized fiber bundle provides comparable spectral uniformity to the integrating sphere while enabling 40 times greater brightness.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Logan E. Hillberry and Joseph P. Rice "Spectral homogenization techniques for the hyperspectral image projector", Proc. SPIE 9452, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXVI, 94520Z (15 May 2015); https://doi.org/10.1117/12.2177180
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital micromirror devices

Integrating spheres

Diffusers

Homogenization

Hyperspectral imaging

Projection systems

Short wave infrared radiation

RELATED CONTENT

Compact multi-projection 3D display using a wedge prism
Proceedings of SPIE (March 17 2015)
Hyperspectral image projector applications
Proceedings of SPIE (February 13 2012)
Development of hyperspectral image projectors
Proceedings of SPIE (September 08 2006)
Dynamically programmable digital tissue phantoms
Proceedings of SPIE (February 21 2008)

Back to Top