Paper
5 May 2015 Volume holographic gratings as optical sensor for heavy metal in bathing waters
G. Bianco, M. A. Ferrara, F. Borbone, F. Zuppardi, A. Roviello, V. Striano, G. Coppola
Author Affiliations +
Abstract
Sensor holograms utilize the diffraction principle of transmitting volume holographic grating (VHG) recorded within a photopolymer appositely functionalized to detect a specific stimulus or analyte. A change in the swelling or shrinking state or cross-linking density of the polymer can be caused by the hologram interaction with an analyte. This leads to a change in the recorded hologram sensor and thus, considering an incident monochromatic light and the VHG angular selectivity, to an angle shift of the diffracted maximum intensity. In this work, two new photopolymers based on a sol-gel matrix opportunely functionalized to be sensitive to transition metals or heavy metals were used as sensitive material to record VHGs. An interferometric set up with a laser source at 532nm was used to record VHGs and gratings of 1000 lines/mm were realized. When exposed to a solution of water and lead, an angle shift of about 3° of the first order diffraction of the grating was measured, demonstrating its capability to reveal the presence of heavy metal in water.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Bianco, M. A. Ferrara, F. Borbone, F. Zuppardi, A. Roviello, V. Striano, and G. Coppola "Volume holographic gratings as optical sensor for heavy metal in bathing waters", Proc. SPIE 9506, Optical Sensors 2015, 95062B (5 May 2015); https://doi.org/10.1117/12.2179171
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holography

Metals

Water

Diffraction gratings

Holograms

Diffraction

Volume holography

Back to Top