Mechanically induced long period fiber gratings on single mode tapered optical fiber for structure sensing applications

María Guadalupe Pulido-Navarro; Sigifredo Marrujo-García; José Alfredo Álvarez-Chávez; Jesús Salvador Velázquez-González; Fernando Martínez-Piñón; Ponciano Jorge Escamilla-Ambrosio

doi:10.1117/12.2187339

28 August 2015 Mechanically induced long period fiber gratings on single mode tapered optical fiber for structure sensing applications

María Guadalupe Pulido-Navarro, Sigifredo Marrujo-García, José Alfredo Álvarez-Chávez, Jesús Salvador Velázquez-González, Fernando Martínez-Piñón, Ponciano Jorge Escamilla-Ambrosio

Author Affiliations +

Proceedings Volume 9609, Infrared Sensors, Devices, and Applications V; 96090S (2015) https://doi.org/10.1117/12.2187339
Event: SPIE Optical Engineering + Applications, 2015, San Diego, California, United States

Abstract

The modal characteristics of tapered single mode optical fibers and its strain sensing characteristics by using mechanically induced long period fiber gratings are presented in this work. Both Long Period Fiber Gratings (LPFG) and fiber tapers are fiber devices that couple light from the core fiber into the fiber cladding modes. The mechanical LPFG is made up of two plates, one flat and the other grooved. For this experiment the grooved plate was done on an acrylic slab with the help of a computer numerical control machine. The manufacturing of the tapered fiber is accomplished by applying heat using an oxygen-propane flame burner and stretching the fiber, which protective coating has been removed. Then, a polymer-tube-package is added in order to make the sensor sufficiently stiff for the tests. The mechanical induced LPFG is accomplished by putting the tapered fiber in between the two plates, so the taper acquires the form of the grooved plate slots. Using a laser beam the transmission spectrum showed a large peak transmission attenuation of around -20 dB. The resultant attenuation peak wavelength in the transmission spectrum shifts with changes in tension showing a strain sensitivity of 2pm/μɛ. This reveals an improvement on the sensitivity for structure monitoring applications compared with the use of a standard optical fiber. In addition to the experimental work, the supporting theory and numerical simulation analysis are also included.

Citation Download Citation

María Guadalupe Pulido-Navarro, Sigifredo Marrujo-García, José Alfredo Álvarez-Chávez, Jesús Salvador Velázquez-González, Fernando Martínez-Piñón, and Ponciano Jorge Escamilla-Ambrosio "Mechanically induced long period fiber gratings on single mode tapered optical fiber for structure sensing applications", Proc. SPIE 9609, Infrared Sensors, Devices, and Applications V, 96090S (28 August 2015); https://doi.org/10.1117/12.2187339

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Cladding

Optical fibers

Single mode fibers

Mechanical sensors

Refractive index

Signal attenuation

Fiber couplers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years