Paper
22 October 2015 A 16-channel CMOS preamplifier for laser ranging radar receivers
Ru-qing Liu, Jing-guo Zhu, Yan Jiang, Meng-lin Li, Feng Li
Author Affiliations +
Proceedings Volume 9674, AOPC 2015: Optical and Optoelectronic Sensing and Imaging Technology; 96742M (2015) https://doi.org/10.1117/12.2202386
Event: Applied Optics and Photonics China (AOPC2015), 2015, Beijing, China
Abstract
A 16-channal front-end preamplifier array has been design in a 0.18um CMOS process for pulse Laser ranging radar receiver. This front-end preamplifier array incorporates transimpedance amplifiers(TIAs) and differential voltage post-amplifier(PAMP),band gap reference and other interface circuits. In the circuit design, the regulated cascade (RGC) input stage, Cherry-Hooper and active inductor peaking were employed to enhance the bandwidth. And in the layout design, by applying the layout isolation structure combined with P+ guard-ring(PGR), N+ guard-ring(NGR),and deep-n-well(DNW) for amplifier array, the crosstalk and the substrate noise coupling was reduced effectively. The simulations show that a single channel receiver front-end preamplifier achieves 95 dBΩ transimpedance gain and 600MHz bandwidth for 3 PF photodiode capacitance. The total power of 16-channel front-end amplifier array is about 800mW for 1.8V supply.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ru-qing Liu, Jing-guo Zhu, Yan Jiang, Meng-lin Li, and Feng Li "A 16-channel CMOS preamplifier for laser ranging radar receivers", Proc. SPIE 9674, AOPC 2015: Optical and Optoelectronic Sensing and Imaging Technology, 96742M (22 October 2015); https://doi.org/10.1117/12.2202386
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Receivers

Pulsed laser operation

Amplifiers

Optical amplifiers

Photodiodes

Ranging

Radar

Back to Top