Paper
15 October 2015 Colorimetric calibration of coupled infrared simulation system
Author Affiliations +
Proceedings Volume 9674, AOPC 2015: Optical and Optoelectronic Sensing and Imaging Technology; 96742R (2015) https://doi.org/10.1117/12.2202722
Event: Applied Optics and Photonics China (AOPC2015), 2015, Beijing, China
Abstract
In order to test 2-color infrared sensors, a coupled infrared simulation system can generate radiometric outputs with wavelengths that range from less than 3 microns to more than 12 microns. There are two channels in the coupled simulation system, optically combined by a diachronic beam combiner. Each channel has an infrared blackbody, a filter, a diaphragm, and diaphragm-motors. The system is projected to the sensor under testing by a collimator. This makes it difficult to calibrate the system with only one-band thermal imager. Errors will be caused in the radiance levels measured by the narrow band thermal imager. This paper describes colorimetric temperature measurement techniques that have been developed to perform radiometric calibrations of these infrared simulation systems above. The calibration system consists of two infrared thermal imagers; one is operated at the wavelength range of MW-IR, and the other at the range of LW-IR.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Zhang, Jindong Fei, Yang Gao, and Jian Du "Colorimetric calibration of coupled infrared simulation system", Proc. SPIE 9674, AOPC 2015: Optical and Optoelectronic Sensing and Imaging Technology, 96742R (15 October 2015); https://doi.org/10.1117/12.2202722
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared imaging

Infrared radiation

Imaging systems

Thermography

Calibration

Temperature metrology

Black bodies

Back to Top