Paper
24 February 2016 Lithium niobate integrated photonic crystal and waveguides
Soon Thor Lim, Thomas Y-L. Ang, Ching Eng Png, Jun Deng, Aaron J. Danner
Author Affiliations +
Proceedings Volume 9744, Optical Components and Materials XIII; 974413 (2016) https://doi.org/10.1117/12.2209519
Event: SPIE OPTO, 2016, San Francisco, California, United States
Abstract
In this work we successfully fabricated and measured PhCs patterned on a LiNbO3 APE waveguide. SIMS data indicate that after 5 hours exchange time a PE layer of 3μm can be obtained. The depth of holes was 2μm by applying a large milling current. We presented experimental characterization of the PhC waveguide and a well-defined PBG was observed from the transmission spectra. An extinction ratio was estimated to be approximately 15dB. Optical transmission results indicate that deep air holes can lead to a sharp band edge. This PhC waveguide is a good candidate for further development of an ultra-compact, low-voltage LiNbO3 modulator.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Soon Thor Lim, Thomas Y-L. Ang, Ching Eng Png, Jun Deng, and Aaron J. Danner "Lithium niobate integrated photonic crystal and waveguides", Proc. SPIE 9744, Optical Components and Materials XIII, 974413 (24 February 2016); https://doi.org/10.1117/12.2209519
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Channel waveguides

Annealing

Crystals

Etching

Photonic crystals

Light wave propagation

Back to Top