Mechanically flexible waveguide arrays for optical chip-to-chip coupling

Tjitte-Jelte Peters; Marcel Tichem

doi:10.1117/12.2205227

15 March 2016 Mechanically flexible waveguide arrays for optical chip-to-chip coupling

Tjitte-Jelte Peters, Marcel Tichem

Proceedings Volume 9760, MOEMS and Miniaturized Systems XV; 97600D (2016) https://doi.org/10.1117/12.2205227
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

This paper reports on the progress related to a multichannel photonic alignment concept, which aims to achieve submicrometer alignment of the waveguides of two photonic integrated circuits (PICs). The concept consists of two steps: chip-to-chip positioning and fixing provide a coarse alignment after which waveguide-to-waveguide positioning and fixing result in a fine alignment. For the waveguide-to-waveguide alignment, mechanically flexible waveguides are used. Positioning of the waveguides is performed by integrated MEMS actuators. The flexible waveguides and the actuators are both integrated in one of the PICs. This paper reports on the fabrication and the mechanical characterization of the suspended waveguide structures. The flexible waveguide array is created in a PIC which is based on TriPleX technology, i.e. a silicon nitride (Si₃N₄) core encapsulated in a silicon dioxide (SiO₂) cladding. The realized flexible waveguide structures consist of parallel cantilevered waveguide beams and a crossbar that connects the free ends of the waveguide beams. The fabrication of suspended structures consisting of a thick, i.e. 15 µm, TriPleX layer stack is challenged by the compressive mean stress in the SiO₂. We have developed a fabrication method for the reliable release of flexible TriPleX structures, resulting in a 96% yield of cantilever beams. The realized suspended waveguide arrays have a natural out-of-plane deformation, which is studied using white light interferometry. Suspended waveguide beams reveal a downward slope at the base of the beams close to 0:5_. In addition to this slope, the beams have a concave upward profile. The constant curvature over the length of the waveguide beams is measured to range from 0:2 µm to 0:8 µm. The profiles measured over the length of the crossbars do not seem to follow a circular curvature. The variation in deflection within crossbars is measured to be smaller than 0:2 µm.

Citation Download Citation

Tjitte-Jelte Peters and Marcel Tichem "Mechanically flexible waveguide arrays for optical chip-to-chip coupling", Proc. SPIE 9760, MOEMS and Miniaturized Systems XV, 97600D (15 March 2016); https://doi.org/10.1117/12.2205227

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available