Paper
5 November 2015 Method of narcissus analysis in infrared system based on ASAP
Author Affiliations +
Proceedings Volume 9795, Selected Papers of the Photoelectronic Technology Committee Conferences held June–July 2015; 97952J (2015) https://doi.org/10.1117/12.2217581
Event: Selected Proceedings of the Photoelectronic Technology Committee Conferences held June-July 2015, 2015, Hefei, Suzhou, and Harbin, China
Abstract
Narcissus of cooled infrared system should be controlled strictly. So, accurate and rapid analysis of narcissus is very important. Deriving the SNR of narcissus based on the definition of noise equivalent power. Using simulation software CodeV and ASAP analyses the narcissus. Screen out the optical surface whose narcissus is serious in CodeV. Then build the model of the system in ASAP and add reasonable surface properties, get the result of size and average irradiance of the image narcissus spot by real ray tracing. Calculate the SNR of narcissus by putting the value of average irradiance into front formulation. On this basis, the simulation analysis and experimental test about the Narcissus of an infrared lens were performed. The experimental result is consistent with the simulation analysis.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guodong Ren, Liang Zhang, Weihua Lan, and Xiaodong Pan "Method of narcissus analysis in infrared system based on ASAP", Proc. SPIE 9795, Selected Papers of the Photoelectronic Technology Committee Conferences held June–July 2015, 97952J (5 November 2015); https://doi.org/10.1117/12.2217581
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared radiation

Signal to noise ratio

Infrared imaging

Sensors

Ray tracing

Code v

Black bodies

Back to Top