Paper
17 May 2016 Tuned dynamic absorber for split Stirling cryogenic cooler
Alexander Veprik, Avi Tuito
Author Affiliations +
Abstract
Tuned dynamic absorbers (TDA) find use, in particular, for attenuating tonal vibration export produced by the moving components of cryogenic cooler. For the best performance, the resonant frequency of TDA needs to be essentially equal the driving frequency; accurate frequency match is favorably achieved by minimizing the cooler induced vibration by adjusting the driving frequency. For the best performance, the design of TDA needs to ensure minimum damping ratio; this is achievable by using planar flexural bearings having zero friction anchoring features. Accurate evaluation of effective mass, damping ratio and frequency is needed for TDA characterization during development and manufacturing. This data may be also important for the dynamic modelling. The authors are exploring the express method requiring no physical access to the proof mass of TDA. In this approach, the TDA is mounted upon the low frequency vibration mounted rod, the dynamic properties of TDA are then evaluated using the frequency response function – local accelerance – captured on the above rod using accelerometer, instrumented modal hammer and dual-channel signal analyzer. The authors are presenting the TDA design, outcomes of full-scale experimentation on dynamic properties evaluation and attained performance.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander Veprik and Avi Tuito "Tuned dynamic absorber for split Stirling cryogenic cooler", Proc. SPIE 9821, Tri-Technology Device Refrigeration (TTDR), 98210F (17 May 2016); https://doi.org/10.1117/12.2228429
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cryogenics

Cryocoolers

Electro optical modeling

Signal analyzers

Electro optics

Data modeling

Infrared imaging

Back to Top