Low-loss crystalline coatings for the near- and mid-infrared

G. D. Cole; W. Zhang; B. J. Bjork; D. Follman; P. Heu; C. Deutsch; L. Sonderhouse; C. Franz; A. Alexandrovski; O. H. Heckl; J. Ye; M. Aspelmeyer

doi:10.1117/12.2234740

19 May 2016 Low-loss crystalline coatings for the near- and mid-infrared

G. D. Cole, W. Zhang, B. J. Bjork, D. Follman, P. Heu, C. Deutsch, L. Sonderhouse, C. Franz, A. Alexandrovski, O. H. Heckl, J. Ye, M. Aspelmeyer

Author Affiliations +

Proceedings Volume 9822, Advanced Optics for Defense Applications: UV through LWIR; 98220Y (2016) https://doi.org/10.1117/12.2234740
Event: SPIE Defense + Security, 2016, Baltimore, MD, United States

Abstract

Substrate-transferred crystalline coatings have recently emerged as a groundbreaking new concept in optical interference coatings. Building upon our initial demonstration of this technology, we have recently realized significant improvements in the limiting optical performance of these novel single-crystal GaAs/AlGaAs multilayers. In the nearinfrared (NIR), for center wavelengths spanning 1064 to 1560 nm, we have reduced the excess optical losses (scatter + absorption) to less than 5 ppm, enabling the realization of a cavity finesse exceeding 300,000 at the telecom-relevant wavelength range near 1550 nm. Moreover, we demonstrate the direct measurement of sub-ppm optical absorption at 1064 nm. Concurrently, we investigate the mid-IR (MIR) properties of these coatings and observe exceptional performance for first attempts in this important wavelength region. Specifically, we verify excess losses at the hundred ppm level for wavelengths of 3300 and 3700 nm. Taken together, our NIR optical losses are now fully competitive with ion beam sputtered films, while our first prototype MIR optics have already reached state-of-the-art performance levels for reflectors covering the important fingerprint region for optical gas sensing. Thus, mirrors fabricated via this technique exhibit the lowest mechanical loss (and thus Brownian noise), the highest thermal conductivity, and, potentially, the widest spectral coverage of any “supermirror” technology, owing to state-of-the art levels of scatter and absorption losses in both the near and mid IR, all in a single material platform. Looking ahead, we see a bright future for crystalline coatings in applications requiring the ultimate levels of optical, thermal, and optomechanical performance.

Citation Download Citation

G. D. Cole, W. Zhang, B. J. Bjork, D. Follman, P. Heu, C. Deutsch, L. Sonderhouse, C. Franz, A. Alexandrovski, O. H. Heckl, J. Ye, and M. Aspelmeyer "Low-loss crystalline coatings for the near- and mid-infrared", Proc. SPIE 9822, Advanced Optics for Defense Applications: UV through LWIR, 98220Y (19 May 2016); https://doi.org/10.1117/12.2234740

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE