Paper
26 September 2016 Up-conversion equivalent circuit to boost current in Si cells
Gavin Conibeer, Santosh Shrestha, Kai Yuen Chan, Shujuan Huang, Binesh Puthen-Veettil
Author Affiliations +
Abstract
Up-conversion for Si solar cells using Er phosphors has the twin problems of a very high concentration requirement and the very narrow bandwidth for absorption. An alternative is to use the equivalent circuit of an up-converter, two below bnadgap solar cells connected in series to pump an above band gap LED, as suggested by Trupke SOLMAT 2005, but not yet attempted experimentally. Results on the current enhancement in such devices are shown for absorption of below Si band gap light in long wavelength cells to pump a InGaAs LED so as to sensitise a Si solar cell.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gavin Conibeer, Santosh Shrestha, Kai Yuen Chan, Shujuan Huang, and Binesh Puthen-Veettil "Up-conversion equivalent circuit to boost current in Si cells", Proc. SPIE 9937, Next Generation Technologies for Solar Energy Conversion VII, 99370F (26 September 2016); https://doi.org/10.1117/12.2242401
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Light emitting diodes

Gallium antimonide

Solar cells

Sun

Indium gallium arsenide

Absorption

Back to Top